D-Link DES-3326S Command Line Interface Reference Manual page 251

enable dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable status of DNS relay:
DES-3326S:4#enable dnsr
Command: enable dnsr
Success.
DES-3326S:4#
disable dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable status of DNS relay.
DES-3326S:4#disable dnsr
Command: disable dnsr
Success.
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to enable DNS relay.
enable dnsr
This command is used, in combination with the
disable dnsr command below, to enable and
disable DNS Relay on the Switch.
None.
Only administrator-level users can issue this
command.
Used to disable DNS relay on the Switch.
disable dnsr
This command is used, in combination with the
enable dnsr command above, to enable and
disable DNS Relay on the Switch.
None.
Only administrator-level users can issue this
command.
245