Routing Table Commands - D-Link DES-3326S Command Line Interface Reference Manual

The routing table commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
create iproute
delete iproute
show iproute
Each command is listed, in detail, in the following sections.
D-Link DES-3326S Layer 3 Switch CLI Reference
Parameters
default
<network_address>
<ipaddr>
<metric 1-65535>
primary
backup
default
<network_address>
<ipaddr>
<network_address>
static
rip
ospf
R T
OUTING ABLE
220
26
C
OMMANDS