D-Link DES-3326S Command Line Interface Reference Manual page 145

show gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display GVRP port status:
DES-3326S:4#show gvrp
Command: show gvrp
Global GVRP : Disabled
Port PVID GVRP
------ ---- -------- ---------------- ---------------------------
1 1 Disabled Enabled
2 1 Disabled Enabled
3 1 Disabled Enabled
4 1 Disabled Enabled
5 1 Disabled Enabled
6 1 Disabled Enabled
7 1 Disabled Enabled
8 1 Disabled Enabled
9 1 Disabled Enabled
10 1 Disabled Enabled
11 1 Disabled Enabled
12 1 Disabled Enabled
13 1 Disabled Enabled
14 1 Disabled Enabled
15 1 Disabled Enabled
16 1 Disabled Enabled
17 1 Disabled Enabled
18 1 Disabled Enabled
19 1 Disabled Enabled
20 1 Disabled Enabled
21 1 Disabled Enabled
22 1 Disabled Enabled
23 1 Disabled Enabled
24 1 Disabled Enabled
25 1 Disabled Enabled
26 1 Disabled Enabled
Total Entries : 26
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to display the GVRP status for a port list on the Switch.
show gvrp {<portlist>}
This command displays the GVRP status for a port list on the Switch
<portlist> − Specifies a range of ports for which the GVRP status is to be
displayed. The port list is specified by listing the lowest Switch number and
the beginning port number on that Switch, separated by a colon. Then the
highest Switch number, and the highest port number of the range (also
separated by a colon) are specified. The beginning and end of the port list
range are separated by a dash. For example, 1:3 specifies Switch number 1,
port 3. 2:4 specifies Switch number 2, port 4. 1:3-2:4 specifies all of the ports
between Switch 1, port 3 and Switch 2, port 4 − in numerical order.
None.
Ingress Checking Acceptable Frame Type
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
All Frames
139