D-Link DES-3326S Command Line Interface Reference Manual page 60

show snmp community
Purpose Used to display SNMP community strings
configured on the Switch.
Syntax
show snmp community {<community_string
32>}
Description
The show snmp community command is used
to display SNMP community strings that are
configured on the Switch.
<community_string 32> − An alphanumeric string
Parameters
of up to 32 characters that is used to identify
members of an SNMP community. This string is
used like a password to give remote SNMP
managers access to MIB objects in the Switch's
SNMP agent.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To display the currently entered SNMP community strings:
DES-3326S:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
-------------------------------- -------------------------------- ------------
dlink
private
public
Total Entries: 3
D-Link DES-3326S Layer 3 Switch CLI Reference
View Name Access Right
ReadView
CommunityView
CommunityView
read_write
read_write
read_only
54