D-Link DES-3326S Command Line Interface Reference Manual page 189

config access_profile
Purpose Used to configure an access profile on the Switch and to define specific values that
will be used to by the Switch to determine if a given packet should be forwarded or
filtered. Masks entered using the create access_profile command will be combined,
using a logical AND operation, with the values the Switch finds in the specified frame
header fields.
Syntax
config access_profile profile_id <value 1-255> [ add access_id <value 1-255>
[ ethernet { vlan <vlan_name 32> | source_mac <macaddr> |
<macaddr> | 802.1p <value 0-7> | ethernet_type <hex 0x0-0xffff> } |
ip { vlan <vlan_name 32> | source_ip <ipaddr> | destination_ip <ipaddr> |
dscp <value 0-63> |
[ icmp { type <value 0-255> code <value 0-255> } | igmp { type <value 0-255>} |
tcp {src_port <value 0-65535> | dst_port <value 0-65535> | flag [all | {urg | ack |
psh | rst | syn | fin } ] } | udp { src_port <value 0-65535> | dst_port <value 0-
65535> } | protocol_id <value 0 - 255> { user_define <hex 0x0-0xffffffff> } ] } ]
[ permit { priority <value 0-7> { replace_priority} | replace_dscp <value 0-63> }
| deny ] | delete access_id <value 1-255> ]
Description The config access_profile command is used to configure an access profile on the
Switch and to enter specific values that will be combined, using a logical AND
operation, with masks entered with the create access_profile command, above.
D-Link DES-3326S Layer 3 Switch CLI Reference
183
destination_mac