D-Link DES-3326S Command Line Interface Reference Manual page 305

show ospf ipif
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To display the current OSPF interface settings, for a specific OSPF interface:
DES-3326S:4#show ospf ipif ipif2
Command: show ospf ipif ipif2
Interface Name: ipif2
((Link Up)
Network Medium Type: BROADCAST
Area ID: 1.0.0.0
Priority: 1
DR Address: 123.234.12.34
Hello Interval: 10
Transmit Delay: 1
5Authentication: None
Total Entries: 1
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to display the current OSPF interface
settings for the specified interface name.
show ospf ipif {<ipif_name>}
This command will display the current OSPF
interface settings for the specified interface
name.
<ipif_name> − The IP interface name for which
you want to display the current OSPF interface
settings.
None.
IP Address: 123.234.12.34|24
Metric: 1
Administrative State: Enabled
DR State: DR
Backup DR Address: None
Dead Interval: 40
Retransmit Time:
299