D-Link DES-3326S Command Line Interface Reference Manual page 102

Example usage:
To configure STP with path cost 19, priority 15, and state enabled for ports 1-5 of module 1.
DES-3326S:4#config stp ports 1:1-1:5 cost 19 priority 15 state
enable
Command: config stp ports 1-5 cost 19 priority 15 state enable
Success.
DES-3326S:4#
enable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable STP, globally, on the Switch:
DES-3326S:4#enable stp
Command: enable stp
Success.
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to globally enable STP on the Switch.
enable stp
This command allows the Spanning Tree
Protocol (STP) or Rapid Spanning Tree Protocol
(RSTP) to be globally enabled on the Switch. By
default, Spanning Tree is not enabled and the
default Spanning Tree version is RSTP (see
config stp command).
None.
Only administrator-level users can issue this
command.
96