D-Link DES-3326S Command Line Interface Reference Manual page 124

config scheduling
Restrictions
NOTICE: The default QoS scheduling arrangement is a strict priority schedule.
To customize scheduling to set up weighted or round-robin queue clearing the
max_latency and max_packets values need to be changed.
Example usage:
To configure traffic scheduling:
DES-3326S:4# config scheduling 0 max_packet 100 max_latency
150
Command: config scheduling 0 max_packet 100 max_latency 150
Success.
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
specified. The default value is 0.
max_latency <value 0-255> − Specifies the maximum amount of
time the above specified priority queue will have to wait before
being allowed to transmit any packets that have accumulated in
its transmit buffer. A value between 0 and 255 can be specified.
This value multiplied by 16 ms is the total time the priority queue
will have to wait. The default value is 0.
Only administrator-level users can issue this command.
118