D-Link DES-3326S Command Line Interface Reference Manual page 97

delete syslog host
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To delete a previously configured syslog host:
DES-3326S:4#delete syslog host 4
Command: delete syslog host 4
Success.
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to remove a syslog host, that has been
previously configured, from the Switch.
delete syslog host [<index 1-4>|all]
The delete syslog host command is used to
remove a syslog host, that has been previously
configured, from the Switch.
<index 1-4> − Specifies that the command will
be applied to an index of hosts. There are four
available indexes, numbered 1 through 4.
all − Specifies that the command will be applied
to all hosts.
Only administrator-level users can issue this
command.
91