D-Link DES-3326S Command Line Interface Reference Manual page 162

disable igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable IGMP snooping on the Switch:
DES-3326S:4#disable igmp_snooping
Command: disable igmp_snooping
Success.
DES-3326S:4#
show igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to enable IGMP snooping on the Switch.
disable igmp_snooping
This command disables IGMP snooping on the
Switch. IGMP snooping can be disabled only if
IP multicast routing is not being used. Disabling
IGMP snooping allows all IGMP and IP multicast
traffic to flood within a given IP interface.
None.
Only administrator-level users can issue this
command.
Used to show the current status of IGMP
snooping on the Switch.
show igmp_snooping {vlan <vlan_name 32>}
This command will display the current IGMP
snooping configuration on the Switch.
<vlan_name 32> − The name of the VLAN for
which you want to view the IGMP snooping
configuration.
None.
156