D-Link DES-3326S Command Line Interface Reference Manual page 148

delete link_aggregation group_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete link aggregation group:
DES-3226S:4#delete link_aggregation group_id 6
Command: delete link_aggregation group_id 6
Success.
DES-3226S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to delete a previously configured link
aggregation group.
delete link_aggregation group_id <value>
This command is used to delete a previously
configured link aggregation group.
<value> − Specifies the group id. The Switch
allows up to 6 link aggregation groups to be
configured. The group number identifies each of
the groups.
Only administrator-level users can issue this
command.
142