Route Redistribution Commands - D-Link DES-3326SRM Command Line Interface Reference Manual

R
OUTE
The switch port commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the following
table.
Command
create route
redistribute dst
ospf
create route
redistribute dst rip
config route
redistribute dst
ospf
delete route
redistribute
show route
redistribute
Each command is listed, in detail, in the following sections.
220
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
R
EDISTRIBUTION
Parameters
src [static/rip/local]
mettype [1/2]
metric <value>
src [static/ospf{all/internal/external/
type_1/type_2}
metic <value>
src [static/rip/local]
mettype [1/2]
metric <value>
dst [rip/ospf]
src [local/static/ospf]
dst [rip/ospf]
src [rip/static/local/ospf]

Route Redistribution Commands

21
C
OMMANDS