enable dnsr static
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable static table lookup for DNS relay:
DES-3326S:4#enable dnsr static
Command: enable dnsr static
Success.
DES-3326S:4#
disable dnsr static
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable static table lookup for DNS relay.
DES-3326S:4#disable dnsr static
Command: disable dnsr static
Success.
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to enable the DNS relay static table.
enable dnsr static
This command, in combination with the disable
dnsr static command below, is used to enable
or disable the DNS relay static table function.
None.
Only administrator-level users can issue this
command.
Used to disable the DNS relay static table.
disable dnsr static
This command, in combination with the disable
dnsr static command below, is used to enable
or disable the DNS relay static table function.
None.
Only administrator-level users can issue this
command.
247