D-Link DES-3326S Command Line Interface Reference Manual page 224

show arpentry
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display the ARP table:
DES-3326S:4#show arpentry
Command: show arpentry
ARP Aging Time : 30
Interface IP Address
------------- ---------------
System 10.0.0.0
System 10.1.1.169
System 10.1.1.254
System 10.9.68.1
System 10.9.68.4
System 10.10.27.51
System 10.11.22.145
System 10.11.94.10
System 10.14.82.24
System 10.15.1.60
System 10.17.42.153
System 10.19.72.100
System 10.21.32.203
System 10.40.44.60
System 10.42.73.221
System 10.44.67.1
System 10.47.65.25
System 10.50.8.7
System 10.90.90.90
System 10.255.255.255 FF-FF-FF-FF-FF-FF Local|Broadcast
Total Entries = 20
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to display the ARP table.
show arpentry {ipif <ipif_name>|ipaddress
<network_address>|static}
This command is used to display the current
contents of the Switch's ARP table.
<ipif_name> − The name of the IP interface the
end node or station for which the ARP table
entry was made, resides on.
<ipaddr> − The network address corresponding
to the IP interface name above.
static − Displays the static entries to the ARP
table.
None.
MAC Address
-----------------
FF-FF-FF-FF-FF-FF Local|Broadcast
00-50-BA-70-E4-4E Dynamic
00-01-30-FA-5F-00
00-A0-C9-A4-22-5B
00-80-C8-2E-C7-45
00-80-C8-48-DF-AB
00-80-C8-93-05-6B
00-10-83-F9-37-6E
00-50-BA-90-37-10
00-80-C8-17-42-55
00-80-C8-4D-4E-0A
00-50-BA-38-7D-5E
00-80-C8-40-C1-06
00-50-BA-6B-2A-1E
00-01-02-03-04-00
00-50-BA-DA-02-51
00-50-BA-DA-03-2B
00-E0-18-45-C7-28
00-01-02-03-04-00
Type
---------------
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Dynamic
Local
218