Bootp Relay Commands - D-Link DES-3326S Command Line Interface Reference Manual

The BOOTP relay commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
config bootp_relay
config bootp_relay
add
config bootp_relay
delete
enable bootp_relay
disable bootp_relay
show bootp_relay
Each command is listed, in detail, in the following sections.
D-Link DES-3326S Layer 3 Switch CLI Reference
Parameters
hops <value>
time <sec>
ipif <ipif_name>
<ipaddr>
ipif <ipif_name>
<ipaddr>
ipif <ipif_name>
B R
OOTP ELAY
235
29
C
OMMANDS