Dns Relay Commands - D-Link DES-3326S Command Line Interface Reference Manual

The DNS relay commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
config dnsr
config dnsr
enable dnsr
disable dnsr
enable dnsr cache
disable dnsr cache
enable dnsr static
disable dnsr static
show dnsr
Each command is listed, in detail, in the following sections.
D-Link DES-3326S Layer 3 Switch CLI Reference
Parameters
primary
secondary
nameserver <ipaddr>
add
delete
static <domain_name>
<ipaddr>
static
DNS R
ELAY
242
30
C
OMMANDS