D-Link DES-3326S Command Line Interface Reference Manual page 299

show ospf aggregation
Purpose Used to display the current OSPF area
aggregation settings.
Syntax
show ospf aggregation {<area_id>}
Description This command will display the current OSPF
area aggregation settings.
Parameters <area_id> − The OSPF area ID.
Restrictions None.
Usage Example
To display OSPF area aggregation settings:
DES-3326S:4#show ospf aggregation
Command: show ospf aggregation
OSPF Area Aggregation Settings
Area ID Aggregated
Network Address Type
------------ ---------------------
10.1.1.1 10.0.0.0|8
10.1.1.1 20.2.0.0|16
Total Entries: 2
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
LSDB Advertise
-------------- -------------
Summary Enabled
Summary Enabled
293