D-Link DES-3326S Command Line Interface Reference Manual page 239

show igmp
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display IGMP configurations:
DES-3326S:4#show igmp
Command: show igmp
Interface I P Address Ver- Query Maximum Robust- Last Member State
------------ ---------------
System 10.90.90.90
Develop 20.1.1.1
Total Entries: 2
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to display the IGMP configuration for the
Switch of for a specified IP interface.
show igmp {ipif <ipif_name>}
This command will display the IGMP
configuration for the Switch if no IP interface
name is specified. If an IP interface name is
specified, the command will display the IGMP
configuration for that IP interface.
<ipif_name> − The name of the IP interface for
which the IGMP configuration will be displayed.
None.
sion Response ness
Time
---- ------ --------
1 125 10
1 125 10
Query
Value Interval
------- ----- -------
2 1 Enabled
2 1 Enabled
233