D-Link DES-3326S Command Line Interface Reference Manual page 254

show dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display DNS relay status:
DES-3326S:4#show dnsr static
Command: show dnsr static
DNS Relay Static Table
Domain Name
-------------------------------------- ---------------
www.123.com.tw
bbs.ntu.edu.tw
Total Entries: 2
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to display the current DNS relay status.
show dnsr {static}
This command is used to display the current
DNS relay status.
static − Allows the display of only the static
entries into the DNS relay table. If this parameter
is omitted, the entire DNS relay table will be
displayed.
None.
IP Address
10.12.12.123
140.112.1.23
248