Route Redistribution Commands - D-Link DES-3350SR Command Line Interface Reference Manual

DES-3350SR Layer 3 Fast Ethernet Switch User's Guide
R R
OUTE
The switch port commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the
following table.
Command Parameters
create route src [static|rip|local]
redistribute dst mettype [1|2]
ospf metric <value>
create route src [static|ospf{all|internal|external|
redistribute dst rip type_1|type_2}]
metic <value>
config route src [static|rip|local]
redistribute dst mettype [1|2]
ospf metric <value>
config route src [static|ospf
redistribute dst rip {all|internal|external|type_1|type_2}
metric <value>
delete route dst [rip|ospf]
redistribute src [rip|static|local|ospf]
show route dst [rip|ospf]
redistribute src [rip|static|local|ospf]
EDISTRIBUTION
C
OMMANDS
197
19