D-Link DES-3326S Command Line Interface Reference Manual page 85

clear counters
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To clear the counters:
DES-3326S:4#clear counters ports 2:7-2:9
Command: clear counters ports 2:7-2:9
Success.
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to clear the Switch's statistics counters.
clear counters {ports <portlist>}
This command will clear the counters used by
the Switch to compile statistics.
<portlist> − Specifies a range of ports to be
configured. The port list is specified by listing
the lowest Switch number and the beginning
port number on that Switch, separated by a
colon. Then highest Switch number, and the
highest port number of the range (also
separated by a colon) are specified. The
beginning and end of the port list range are
separated by a dash. For example, 1:3 would
specify Switch number 1, port 3. 2:4 specifies
Switch number 2, port 4. 1:3-2:4 specifies all of
the ports between Switch 1, port 3 and Switch 2,
port 4 − in numerical order.
Only administrator-level users can issue this
command.
79