D-Link DES-3326S Command Line Interface Reference Manual page 240

show igmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display IGMP group table:
DES-3326S:4#show igmp group
Command: show igmp group
Interface Multicast Group Last Reporter Querier IP Address IP Expire Time
-------------------- ------------------- --------------------- ------------------------ -------------------
System 224.0.0.2
System 224.0.0.9
System 224.0.1.24
System 224.0.1.41
System 224.0.1.149
Total Entries: 5
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to display the Switch's IGMP group table.
show igmp group {group <group>} {ipif
<ipif_name>}
This command will display the IGMP group
configuration.
group <group> − The multicast group ID.
<ipif_name> − The name of the IP interface the
IGMP group is part of.
None.
10.42.73.111 10.48.74.122
10.20.53.1 10.48.74.122
10.18.1.3 10.48.74.122
10.1.43.252 10.48.74.122
10.20.63.11 10.48.74.122
260
260
259
259
259
234