enable bootp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable the BOOTP relay function.
DES-3326S:4#enable bootp_relay
Command: enable bootp_relay
Success.
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to enable the BOOTP relay function on
the Switch.
enable bootp_relay
This command, in combination with the disable
bootp_relay command below, is used to enable
and disable the BOOTP relay function on the
Switch.
None.
Only administrator-level users can issue this
command.
239