The IGMP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command
config igmp
show igmp
show igmp group
Each command is listed, in detail, in the following sections.
D-Link DES-3326S Layer 3 Switch CLI Reference
Parameters
ipif <ipif_name 12>
all
version <value 1-2>
query_interval <1-65535 sec>
max_response_time <1-25 sec>
robustness_variable <value 1-255>
last_member_query_interval <value 1-25>
state [enable|disable]
ipif <ipif_name 12>
group <group>
ipif <ipif_name 12>
IGMP C
231
28
OMMANDS