config arp_aging
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To configure ARP aging time:
DES-3326S:4#config arp_aging time 30
Command: config arp_aging time 30
Success.
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to configure the age-out timer for ARP
table entries on the Switch.
config arp_aging time <value>
This command sets the maximum amount of
time, in minutes, that an ARP entry can remain
in the Switch's ARP table, without being
accessed, before it is dropped from the table.
time <value 0-65535> − The ARP age-out time,
in minutes. The default is 20.
Only administrator-level users can issue this
command.
217