D-Link DES-3326S Command Line Interface Reference Manual page 57

show snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display the previously created SNMP view:
DES-3326S:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name Subtree
-------------------- ------------------------- ----------
ReadView
WriteView
NotifyView 1.3.6
restricted 1.3.6.1.2.1.1
restricted 1.3.6.1.2.1.11
restricted 1.3.6.1.6.3.10.2.1
restricted 1.3.6.1.6.3.11.2.1
restricted 1.3.6.1.6.3.15.1.1
CommunityView 1.3.6.1.6.3
CommunityView .3.6.1.6.3.1
Total Entries: 10
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to display an SNMP view previously
created on the Switch.
show snmp view {<view_name 32>}
The show snmp view command displays an
SNMP view previously created on the Switch.
<view_name 32> − An alphanumeric string of
up to 32 characters that identifies the SNMP
view that will be displayed.
Only administrator-level users can issue this
command.
View Type
1 Included
1 Included
Included
Included
Included
Included
Included
Included
Excluded
Included
51