D-Link DES-3326S Command Line Interface Reference Manual page 70

ping
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To send ICMP echo message to "10.48.74.121" for 4 times:
DES-3326S:4#ping 10.48.74.121 times 4
Command: ping 10.48.74.121
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Ping Statistics for 10.48.74.121
Packets: Sent =4, Received =4, Lost =0
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to test the connectivity between network
devices.
ping <ipaddr> {times <value>}
{timeout <sec>}
This command sends Internet Control Message
Protocol (ICMP) echo messages to a remote IP
address. The remote IP address will then
"echo" or return the message. This is used to
confirm connectivity between the Switch and the
remote device.
<ipaddr> − the IP address of the remote device.
times <value 1-255> − the number of individual
ICMP echo messages to be sent. The
maximum value is 255. The default is inifinite
times (pings are sent coninuosly).
timeout <sec 1-99> − defines the time-out
period while waiting for a response from the
remote device. A value of 1 to 99 seconds can
be specified. The default is 1 second.
Only administrator-level users can issue this
command.
64