D-Link DES-3326S Command Line Interface Reference Manual page 302

show ospf virtual neighbor
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To display the current OSPF virtual neighbor table:
DES-3326S:4#show ospf virtual_neighbor
Command: show ospf virtual_neighbor
Transit Router ID of
Area ID Virtual Neighbor Virtual Neighbor State
--------------- ----------------
10.1.1.1 10.2.3.4
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to display the current OSPF virtual
neighbor router table.
show ospf virtual_neighbor {<area_id>
<neighbor id>}
This command will display the current OSPF
virtual neighbor router table.
<area_id> − A 32-bit number in the form of an IP
address (xxx.xxx.xxx.xxx) that uniquely identifies
the OSPF area in the OSPF domain.
<neighbor_id> − The OSPF router ID for the
neighbor. This is a 32-bit number in the form of
an IP address (xxx.xxx.xxx.xxx) that uniquely
identifies the remote area's Area Border Router.
None.
IP Address of
---------------
10.48.74.111
Virtual Neighbor
----------------
Exchange
296