D-Link DES-3326S Command Line Interface Reference Manual page 260

show rip
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display RIP configuration.
DES-3326S:4#show rip
Command: show rip
RIP Interface Settings
RIP Global State : Disabled
Interface IP Address
------------- ------------------
System 10.41.44.33|8
Total Entries : 1
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to display the RIP configuration and
statistics for the Switch.
show rip {ipif <ipif_name>}
This command will display the RIP configuration
and statistics for a given IP interface or for all IP
interfaces.
<ipif_name> − the name of the IP interface for
which you want to display the RIP configuration
and settings. If this parameter is not specified,
the show rip command will display the global
RIP configuration for the Switch.
None.
TX Mode
----------
Disabled Disabled
RX Mode Authen-
tication
------------- ----------
Disabled Disabled
254
State
-----