D-Link DES-3326S Command Line Interface Reference Manual page 236

show route redistribute
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display route redistributions:
DES-3326S:4#show route redistribute
Command: show route redistribute
Source Destination Type
Protocol Protocol
-------- ------------
STATIC RIP
LOCAL OSPF
Total Entries : 2
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to display the route redistribution on the
Switch.
show route redistribute {dst [rip|ospf]|src
[rip|static|local|ospf]}
Displays the current route redistribution settings
on the Switch.
src − Allows the selection of the routing protocol
on the source device.
dst − Allows the selection of the routing protocol
on the destination device.
None.
Metric
-------- --------
All 1
Type-2 20
230