D-Link DES-3326S Command Line Interface Reference Manual page 292

create ospf host_route
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To configure the OSPF host route settings:
DES-3326S:4#create ospf host_route 10.48.74.122 area 10.1.1.1 metric 2
Command: create ospf host_route 10.48.74.122 area 10.1.1.1 metric 2
Success.
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to configure OSPF host route settings.
create ospf host_route <ipaddr> {area
<area_id>|metric <value>}
This command is used to configure the OSPF host
route settings.
<ipaddr> − The host's IP address
<area_id> − <area_id> − A 32-bit number in the
form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF
domain.
<value> − A metric between 1 and 65535, which
will be advertised.
Only administrator-level users can issue this
command.
286