D-Link DES-3326S Command Line Interface Reference Manual page 151

show link_aggregation
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display Link Aggregation configuration
DES-3226S:4#show link_aggregation
Command: show link_aggregation
Link Aggregation Algorithm = MAC-source-dest
Group ID : 1
Master Port : 2:17
Member Port : 1:5-1:10,2:17
Status : Disabled
Flooding Port : 1:5
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to display the current link aggregation
configuration on the Switch.
show link_aggregation {group_id
<value>|algorithm}
This command will display the current link
aggregation configuration of the Switch.
<value> − Specifies the group id. The Switch
allows up to 6 link aggregation groups to be
configured. The group number identifies each of
the groups.
algorithm − Allows you to specify the display of
link aggregation by the algorithm in use by that
group.
None.
145