Vlan Commands - D-Link DES-3326S Command Line Interface Reference Manual

The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters)
in the following table.
Command
create vlan
delete vlan
config vlan
config vlan
config vlan
config gvrp
enable gvrp
disable gvrp
show vlan
show gvrp
Each command is listed, in detail, in the following sections.
D-Link DES-3326S Layer 3 Switch CLI Reference
Parameters
<vlan_name 32>
tag <vlanid>
advertisement
<vlan_name 32>
<vlan_name 32>
add [tagged|untagged|forbidden]
delete
<portlist>
advertisement [enable|disable]
<vlan_name 32>
delete <portlist>
<vlan_name 32>
<portlist>
all
state [enable|disable]
ingress_checking [enable|disable]
acceptable_frame [tagged_only|accept_all]
<vlan_name 32>
<portlist>
VLAN C
131
16
OMMANDS