D-Link DES-3326S Command Line Interface Reference Manual page 202

Example usage:
To display all of the currently configured access profiles on the Switch:
DES-3326S:4#show cpu access_profile
Command: show cpu access_profile
CPU Interface Filtering state: [Enabled]
CPU Interface Filtering Access Profile Table
Access Profile ID : 1
TYPE : Ethernet Frame Filter
================================================================================
MASK Option :
VLAN Source MAC
FF-FF-FF-FF-FF-FF FF-FF-FF-FF-FF-FF
------------ ----------------- ----------------- ------ --------
Access ID : 1 (250)
------------ ----------------- ----------------- ------ --------
default 00-00-00-00-00-01 00-00-00-00-00-02 0
================================================================================
Access Profile ID : 255
TYPE : IP Frame Filter
================================================================================
MASK Option :
VLAN Source IP MASK Dst. IP MASK
255.255.255.255 255.255.255.0
------------ --------------- --------------- ---- -----------------
Access ID : 255 (251)
------------ --------------- --------------- ---- -----------------
default 10.1.1.14
================================================================================
Total Entries : 2
DES-3326S:4#
delete cpu access_profile access_profile
Purpose
Syntax
Description
Parameters
D-Link DES-3326S Layer 3 Switch CLI Reference
Destination MAC 802.1p Ethernet
Mode : Permit
Mode : Deny
10.23.23.0 63 200
Used to delete a previously created access profile or cpu access profile.
delete cpu access_profile profile_id <value 1-255>
The delete cpu access_profile command is used to delete a previously
created cpu access profile.
profile_id <value 1-255> − Enter an integer between 1 and 255 that is used
to identify the access profile or cpu access profile to be deleted with this
command. This value is assigned to the access profile when it is created
with the create cpu access_profile command.
0x800
DSCP ICMP TYPE CODE
200
196