D-Link DES-3326S Command Line Interface Reference Manual page 264

show dvmrp routing_table
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display DVMRP routing table:
DES-3326S:4#show dvmrp routing_table
Command: show dvmrp routing_table
DVMRP Routing Table
Source Address Source Mask Next Hop Router Hop Learned Interface
--------------- ---------------
10.0.0.0 255.0.0.0
20.0.0.0 255.0.0.0
30.0.0.0 255.0.0.0
Total Entries: 3
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
Used to display the current DVMRP routing table.
show dvmrp routing table {ipaddress
<network_address>}
The command is used to display the current
DVMRP routing table.
<ipif_name> − The name of the IP interface for
which you want to display the corresponding
DVMRP routing table.
ipaddress <network_address> − The IP address
and netmask of the destination. You can specify
the IP address and netmask information using
the traditional format or the CIDR format. For
example, 10.1.2.3|255.255.0.0 or 10.2.3.4|16.
None.
--------------- ----
10.90.90.90
20.1.1.1
30.1.1.1
------- ------------
2 Local System
2 Local ip2
2 Local ip3
258
Expire
------
-
-
-