D-Link DES-3326S Command Line Interface Reference Manual page 228

delete iproute
Purpose Used to delete an IP route entry from the
Switch's IP routing table.
Syntax
delete iproute [ default | <network_address>]
<ipaddr>
Description This command will delete an existing entry from
the Switch's IP routing table.
Parameters default − deletes a default IP route entry.
<network_address> − IP address and netmask of
the IP interface that is the destination of the
route. You can specify the address and mask
information using the traditional format (for
example, 10.1.2.3|255.0.0.0 or in CIDR format,
10.1.2.3|16).
<ipaddr> - IP address of the next hop router for
removal from the routing table.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To delete a static address 10.48.75.121, mask 255.0.0.0 from the routing table:
DES-3326S:4#delete iproute 10.48.74.121|255.0.0.0
Command: delete iproute 10.48.74.121|8
Success.
DES-3326S:4#
D-Link DES-3326S Layer 3 Switch CLI Reference
222