Copy A Binary File To The Startup-Configuration; Additional Mib Objects To View Copy Statistics - Dell S4820T Configuration Manual

Copy a Binary File to the Startup-Configuration

To copy a binary file from the server to the startup-configuration on the Dell Networking system via FTP,
use the following command.
• Copy a binary file from the server to the startup-configuration on the Dell Networking system via FTP.
snmpset -v 2c -c public -m ./f10-copy-config.mib force10system-ip-address
copySrcFileType.index i 1 copySrcFileLocation.index i 4 copySrcFileName.index
s filepath/filename copyDestFileType.index i 3 copyServerAddress.index a
server-ip-address copyUserName.index s server-login-id copyUserPassword.index
s server-login-password
Example of Copying a Binary File From the Server to the Startup-Configuration via FTP
> snmpset -v 2c -c private -m ./f10-copy-config.mib 10.10.10.10 copySrcFileType.
10 i 1
copySrcFileLocation.10 i 4 copyDestFileType.10 i 3 copySrcFileName.10 s /home/
myfilename
copyServerAddress.10 a 172.16.1.56 copyUserName.10 s mylogin copyUserPassword.
10 s mypass

Additional MIB Objects to View Copy Statistics

Dell Networking provides more MIB objects to view copy statistics, as shown in the following table.
Table 75. Additional MIB Objects for Copying Configuration Files via SNMP
MIB Object
copyState
copyTimeStarted
copyTimeCompleted
copyFailCause
Simple Network Management Protocol (SNMP)
OID
.
1.3.6.1.4.1.6027.3.5.1.1.1.
1.11
.
1.3.6.1.4.1.6027.3.5.1.1.1.
1.12
.
1.3.6.1.4.1.6027.3.5.1.1.1.
1.13
.
1.3.6.1.4.1.6027.3.5.1.1.1.
1.14
Values
1= running
2 = successful
3 = failed
Time value
Time value
1 = bad filename
2 = copy in progress
3 = disk full
4 = file exists
5 = file not found
Description
Specifies the state of the
copy operation.
Specifies the point in the
up-time clock that the
copy operation started.
Specifies the point in the
up-time clock that the
copy operation
completed.
Specifies the reason the
copy request failed.
941