Set Cli Restart-On-Upgrade - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

set cli restart-on-upgrade

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
set cli set cli
restart-on-upgrade restart-on-upgrade
142
set cli restart-on-upgrade string (off | on)
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
For an individual session, set the CLI to prompt you to restart the router or switch after
upgrading the software.
off —Disables the prompt.
on —Enables the prompt.
view
show cli on page 147
set cli restart-on-upgrade on page 142
When you enter this command, you are provided feedback on the status of your request.
user@host> set cli restart-on-upgrade on
Enabling restart-on-upgrade