Configuring Poe (J-Web Procedure) - Dell PowerConnect J-EX4200-24T Software Manual

Related
Documentation

Configuring PoE (J-Web Procedure)

Table 399: PoE Edit Settings
Field Description
Enable PoE Specifies that PoE is enabled on the interface.
Priority Lists the power priority (Low or High) configured on
ports enabled for PoE.
Configuring PoE (J-Web Procedure) on page 3023
Example: Configuring PoE Interfaces on a J-EX Series Switch on page 3013
Example: Configuring PoE Interfaces with Different Priorities on a J-EX Series Switch
on page 3015
Verifying PoE Configuration and Status (CLI Procedure) on page 3028
PoE and J-EX Series Switches Overview on page 3009
Power over Ethernet (PoE) ports supply electric power over the same ports that are used
to connect network devices to J-EX Series switches. These ports allow you to plug in
devices that require both network connectivity and electric power, such as VoIP phones,
wireless access points, and some IP cameras. Using the Power over Ethernet (PoE)
Configuration page in the J-Web interface, you can modify the settings of all interfaces
that are PoE-enabled.
To configure PoE:
Select >
1. Configure Power over Ethernet
The page displays a list of all interfaces except uplink ports. Specific operational
details about an interface are displayed in the Details section of the page. The details
include the PoE Operational Status and Port class.
NOTE: After you make changes to the configuration in this page, you must
commit the changes for them to take effect. To commit all changes to
the active configuration, select
Commit Options to Commit Configuration Changes (J-Web Procedure)"
on page 334 for details about all commit options.
Click one:
2.
—Changes PoE settings for the selected port as described in Table 399 on
Edit
page 3023.
—Modifies general PoE settings as described in Table 400 on
System Settings
page 3024.
Chapter 115: Configuring PoE
.
>
Commit Options Commit
Your Action
Select this option to enable PoE on the
interface.
Set the priority as
High
. See "Using the
or .
Low
3023