Dell PowerConnect J-EX4200-24T Software Manual page 3185

If you are configuring a CCC on a tagged VLAN interface, enable VLAN tagging on the
8.
customer-edge interface
If you are configuring a CCC on a simple interface (
If you are configuring a CCC on a tagged VLAN interface, configure the logical unit of
9.
the customer-edge interface with a VLAN ID:
If you are configuring a CCC on a simple interface (
Configure the logical unit of the customer-edge interface to belong to
10.
Associate the CCC interface with two LSPs, one for transmitting MPLS packets and
11.
the other for receiving MPLS packets:
When you have completed configuring one PE switch, follow the same procedures to
configure the other PE switch.
Related Example: Configuring MPLS on J-EX Series Switches on page 3071
Documentation
Configuring MPLS on Provider Switches (CLI Procedure) on page 3102
ge-0/0/2
[edit interfaces ge-0/0/2]
user@switch# set vlan-tagging
[edit interfaces ge-0/0/2 unit 1]
user@switch# set vlan-id 100
[edit interfaces ge-0/0/1 unit 0]
user@switch# set family ccc
[edit interfaces ge-0/0/2 unit 1]
user@switch# set family ccc
[edit protocols]
user@switch# set connections remote-interface-switch ge-1–to-pe2 interface ge-0/0/1.0
user@switch# set connections remote-interface-switch ge-1–to-pe2 transmit-lsp
lsp_to_pe2_ge1
user@switch# set connections remote-interface-switch ge-1–to-pe2 receive-lsp
lsp_to_pe1_ge1
[edit protocols]
user@switch# set connections remote-interface-switch ge-1–to-pe2 interface ge-0/0/2.1
user@switch# set connections remote-interface-switch ge-1–to-pe2 transmit-lsp
lsp_to_pe2_ge1
user@switch# set connections remote-interface-switch ge-1–to-pe2 receive-lsp
lsp_to_pe1_ge1
TIP: The
transmit-lsp
on PE-1 (the local PE switch) by the
the stanza.
protocols mpls
The receive-lsp option specifies the LSP name that was configured on
PE-2 (the remote PE switch) by the
the stanza.
protocols mpls
of the local PE switch:
ge-0/0/1
ge-0/0/1
option specifies the LSP name that was configured
label-switched-path
label-switched-path
Chapter 122: Configuring MPLS
), omit this step.
), omit this step.
family ccc :
statement within
statement within
3113