E.7 Date And Time - Siemens SITRANS FC430 Operating Instructions Manual

HMI menu ID Parameter
2.5.9.7.2 Duration time
2.5.9.7.3 Overrun mode
2.5.9.7.4 Overrun value
E.7 Date and time
Table E-22 Date and time
HMI menu ID Parameter
2.7.1 Current date & time
2.7.2 Set date and time
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Description
Define the supervision time. An
alarm is raised and valve(s)
closed if dosing time is excee‐
ded.
Enable or disable dosing
amount supervision. An alarm is
raised and valve(s) closed if dos‐
ing amount is exceeded.
Define the dosing overrun
amount. An alarm is raised and
valve(s) closed if dosing amount
is exceeded.
Description
Show actual date and time of the
device. This date and time is
used for all timestamps of log‐
ged information.
Set current date and time of the
device. This date and time is
used for all timestamps of log‐
ged information
Default value Value range
[unit]
3600 1 to 360000
Off
● Off
● On
0
Default value Value range
[unit]
Default settings

E.7 Date and time

Access
level
User
User
User
Access
level
User
User
457