Date And Time - Siemens SICAM 7KG85X Manual

Operational Indications and Operating Parameters
13.2 Basic Functions
Table 13-5
Parameter
Logon activation
Logon password
Session timeout (min)
13.2.2

Date and Time

Table 13-6
Parameter
Source time synchronization
Time zone offset to UTC
Daylight Saving Time switch-
over
DST offset
Start of DST
End of DST
Additional Parameters if the Source is Ethernet NTP (Communication Ethernet bus protocol is set to
Modbus TCP or IEC 61850)
Primary NTP server IP Address
Secondary NTP server IP
Address
Error indication after
264
Settings for Logon Configurations
Default Setting
yes
000000
10 min
Settings for Time Synchronization
Default Setting
Internal
+00:00
Yes
+01:00
March
Last week
Sunday
2:00 AM
October
Last week
Sunday
3:00 AM
0.0.0.0
0.0.0.0
10 min
Setting Range
To disable the logon function, select no
To enable the logon function, select yes
Any, 6 to 14 characters
0 min (no timeout) to 1440 min (1 day)
If 0 is selected, after the device starts up, you only
have to log on once.
Setting Range
Internal
Ethernet NTP
Fieldbus
-12:00 to +13:00 (hours)
(in increments of 0.5 h)
No
Yes
0:00 to +2:00 (hours)
(in increments of 0.5 h)
January to December
First week
Second week
Third week
Fourth week
Last week
Sunday to Saturday
12:00 AM to 11:00 PM
(in increments of 1 h)
January to December
First week
Second week
Third week
Fourth week
Last week
Sunday to Saturday
12:00 AM to 11:00 PM
(in increments of 1 h)
Any
No polling of the NTP server if 0.0.0.0 is entered
Any
No polling of the NTP server if 0.0.0.0 is entered
2 min to 120 min
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022