Parameter View - Siemens SITRANS FC430 Operating Instructions Manual

Parameter item
In navigation view parameters are shown without an arrow in the most right position except
when the parameter is selected. When selected, the parameter is expanded into two lines; the
second line shows the value of the parameter, a lock icon ( ) (only for read access level of the
parameter), and an arrow in most right position.
Figure 7-4
The selected parameter can be edited in the parameter view.
Figure 7-5
The selected parameter can only be viewed in the parameter view
7.1.1.9

Parameter view

Depending upon your access level, you can edit the value of the selected parameter or read
the current value.
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Navigation view ReadWrite
Navigation view ReadOnly
Operating FC430
7.1 Operating instructions
131