Basic Safety Notes - Siemens SITRANS FC430 Operating Instructions Manual

Commissioning
In this chapter it is described how to commission the device via the local display using the
Quick commissioning wizard.
6.1

Basic safety notes

Improper commissioning in hazardous areas
Device failure or risk of explosion in hazardous areas.
● Do not commission the device until it has been mounted completely and connected in
● Before commissioning take the effect on other devices in the system into account.
Hot surfaces
Risk of burns resulting from hot surfaces.
● Take corresponding protective measures, for example by wearing protective gloves.
Note
Hot surface is only an issue for media or ambient temperature above 50 °C.
Loss of type of protection
Damage to device if the enclosure is open or not properly closed. The type of protection
specified on the nameplate or in Technical data (Page 229) is no longer guaranteed.
● Make sure that the device is securely closed.
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
WARNING
accordance with the information in Installing/mounting (Page 41).
WARNING
CAUTION
6
95