Siemens SITRANS FC430 Operating Instructions Manual page 517

HMI menu ID Parameter
3.8.3.2.9 Device alarms
3.8.3.2.10 Channel 1 alarms
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Description
Simulate single or multiple
alarms. Select from alarm list
Simulate single or multiple
alarms. Select from alarm list
E.9 Maintenance and diagnostics
Default value Value range
[unit]
● 148 Transm.
Temp. above
alarm limit
● 149 Transm.
Temp. below
alarm limit
● 150 Sensor
signal
disrupted
● 159 Internal
error in
transmitter
Process value
● 153 CH1 loop
Alarm
cur. In lower
saturation
● 154 CH1 loop
cur. In upper
saturation
● 155 CH1 loop
current
deviation
158 CH 1 cable
break
Default settings
Access
level
User
User
517