Siemens SITRANS FC430 Operating Instructions Manual page 339

HMI menu ID Parameter
2.3.1.7 Fail-safe behaviour
2.3.1.8 Reset
2.3.1.9 Preset
2.3.1.10 Alarm and warning limits
2.3.1.10.11) Upper alarm limit
2.3.1.10.21) Upper warning limit
2.3.1.10.31) Lower warning limit
2.3.1.10.4 1) Lower alarm limit
2.3.1.10.5 1) Hysteresis
2.3.1.10.12) Upper alarm limit
2.3.1.10.22) Upper warning limit
2.3.1.10.32) Lower warning limit
2.3.1.10.4 2) Lower alarm limit
2.3.1.10.5 2) Hysteresis
2.3.1.10.3) Upper alarm limit
2.3.1.10.23) Upper warning limit
2.3.1.10.33) Lower warning limit
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Description
Select reaction of the totalizer
function in case of unreliable
process flow value.
Reset totalizer 1 to zero
Reset totalizer 1 to selected pre‐
set value
Set upper alarm limit. Alarm is
triggered if totalizer 1 value is
above the limit.
Set upper warning limit. Waning
is triggered if totalizer 1 value is
above the limit.
Set lower warning limit. Warning
is triggered if totalizer 1 value is
above the limit.
Set lower alarm limit. Alarm is
triggered if totalizer 1 value is
above the limit.
Sets the hysteresis for alarm
and warning limits. The hystere‐
sis is the distance between the
limits for activation and deactiva‐
tion of an alarm/warning.
Set upper alarm limit. Alarm is
triggered if totalizer 1 value is
above the limit.
Set upper warning limit. Warning
is triggered if totalizer 1 value is
above the limit.
Set lower warning limit. Warning
is triggered if totalizer 1 value is
above the limit.
Set lower alarm limit. Alarm is
triggered if totalizer 1 value is
above the limit.
Enter the hysteresis to avoid un‐
wanted rapid switching.
Set upper alarm limit. Alarm is
triggered if totalizer 1 value is
above the limit.
Set upper warning limit. Warning
is triggered if totalizer 1 value is
above the limit.
Set lower warning limit. Warning
is triggered if totalizer 1 value is
above the limit.
Default value Value range
[unit]
Run
● Run
● Hold
● Memory
● Cancel
● Ok
● Cancel
● Ok
[kg]
[kg]
[kg]
[kg]
0
[kg]
[m3]
[m3]
[m3]
[m3]
0
[m3]
[normal m3]
[normal m3]
[normal m3]
Default settings
E.4 Totalizer
Access
level
User
User
User
User
User
User
User
User
User
User
User
User
User
User
User
User
339