Siemens SITRANS FC430 Operating Instructions Manual page 278

HMI menu structure
B.1 Main menu
Level 1
No. Name
2 Setup
3 Maintenance & Diagnostics
4 Communication
5 Security
6 Language
278
Level 2
No. Name
2.1 Sensor
2.2 Process values
2.3 Totalizer
2.4 Inputs and outputs
2.5 Dosing
2.7 Date and time
2.8 Local display
3.1 Identification
3.2 Diagnostic events
3.3 Maintenance
3.4 Diagnostics
3.5 Peak values
3.6 Charateristics
3.7 Sensor flash
3.8 Simulation
3.9 Audit trail
3.10 Self test
3.11 Resets
3.12 Firmware update
4.1 USB (Service channel)
4.2 HART (channel 1)
4.3 Modbus (channel 1)
4.4 Profibus DP/PA
5.1 Change user PIN
5.2 Change expert PIN
5.3 Recovery ID
5.4 PIN recovery
5.5 Activate user PIN
5.6 Deactivate user PIN
5.7 Auto logout
5.8 Logout
More information
Menu item 2.1: Sensor (Page 279)
Menu item 2.2: Process values
(Page 280)
Menu item 2.3: Totalizer (Page 283)
Menu item 2.4: Inputs and outputs
(Page 284)
Menu item 2.5: Dosing (Page 291)
Menu item 2.7: Date and time
(Page 296)
Menu item 2.8: Local display (Page 297)
Menu item 3.1: Identification (Page 299)
Menu item 3.2: Diagnostic events
(Page 300)
Menu item 3.3: Maintenance (Page 301)
Menu item 3.3: Maintenance (Page 301)
Menu item 3.4: Diagnostics (Page 301)
Menu item 3.6: Characteristics
(Page 303)
Menu item 3.7: SensorFlash (Page 304)
Menu item 3.8: Simulation (Page 306)
Menu item 3.9: Audit trail (Page 307)
Menu item 3.10: Self test (Page 307)
Menu item 3.11: Resets (Page 308)
Menu item 3.12: Firmware update
(Page 308)
Menu item 5.1: Change User PIN
Menu item 5.1: Change expert
Menu item 5.1: Recovery ID
Menu item 5.1: PIN recovery
Menu item 5.1: Activate user PIN
Menu item 5.1: Deactivate user PIN
Menu item 5.1: Auto logout
Menu item 5.1: Logout
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA