Alarm acknowledgement
There are two ways to have the alarms removed from the alarm list.
● Manual: The alarm remains in the alarm list until the alarm is manually acknowledged (ack.).
The time of the acknowledgement is shown in the history log.
● Auto: The alarm is removed from the alarm list when the cause is removed (going)
7.1.1.7
Diagnostic views
Diagnostic view
Six Diagnostic Values
1
2
3
4
5
6
①
②
③
④
⑤
⑥
7.1.1.8
Navigation view
Navigation view
The navigation views present the menu structure of the device. All menu items are uniquely
identified with menu item number.
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
First process/diagnostic
value
Second process/diag‐
nostic value
Third process/diagnostic
value
Fourth process/diagnos‐
tic value
Fifth process/diagnostic
value
Sixth process/diagnostic
value
The user-defined process value to be displayed is configured in
menu "View" (1-6) located at "Setup" → "Display"
The user-defined process value to be displayed is configured in
menu "View" (1-6) located at "Setup" → "Display"
The user-defined process value to be displayed is configured in
menu "View" (1-6) located at "Setup" → "Display"
The user-defined process value to be displayed is configured in
menu "View" (1-6) located at "Setup" → "Display"
The user-defined process value to be displayed is configured in
menu "View" (1-6) located at "Setup" → "Display"
The user-defined process value to be displayed is configured in
menu "View" (1-6) located at "Setup" → "Display"
Operating FC430
7.1 Operating instructions
129