E.13 Security - Siemens SITRANS FC430 Operating Instructions Manual

Default settings
E.14 Language
E.13 Security
Table E-46 Access Management
HMI menu ID Parameter
5.1 Change user PIN Code
5.2 Change expert PIN
Code
5.3 Recovery ID
5.4 4 PIN recovery
5.5 Activate user PIN
5.6 Deactivate user PIN
5.7 Auto logout
5.8 Logout
E.14 Language
Table E-47 Language
HMI menu ID Parameter
6 Language
530
Description
Change PIN code used to ac‐
cess the user access level.
Change PIN code used to ac‐
cess the expert access level.
If you forgot the PIN contact Sie‐
mens customer support and re‐
quest a PUK by providing the
Recovery ID.
Enter Pin Unlock Key (PUK) you
got from Siemens customer sup‐
port. Afterwards the default PINs
as indicated in the manual are
valid.
Do you wish to enable the ac‐
cess control?
Do you wish to disable the ac‐
cess control?
Set Auto Log Off. When Disa‐
bled you will not be prompted for
password for 10 minutes after
the last key press.
Description
Select the local display lan‐
guage
Default value Value range
[unit]
On
● Off
● On
Default value Value range
[unit]
English
● English
● Deutsch
● Italiano
● Français
● Español
● 汉语
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA
Access
level
Expert
Expert
Expert
Expert
Expert
Expert
Expert
Access
level
User