Siemens SITRANS FC430 Operating Instructions Manual page 92

Connecting
5.4 Device nameplates
FCT030 transmitter approval nameplate
①
②
③
④
FCS400 sensor approval nameplate
①
②
③
④
Note
Logos and warnings
Logos and warnings are only shown on the product where applicable. The combination shown
in the example above is relevant for a hygienic sensor installed in hazardous area in Canada.
The Australian C-tick mark is mandatory on all products.
92
QR code Product-specific QR code
WEEE symbol, see Disposal (Page 189)
C✓ C-tick logo
FORCE OIML Custody Transfer evaluation certificate number
QR code Product-specific QR code
C✓ C-tick logo
3A 3A logo
WEEE symbol, see Disposal (Page 189)
FC430 (From firmware 4.0)
Operating Instructions, 06/2017, A5E39789392-AA